Mitsubishi Electric MELSEC iQ-F FX5UC-32MT/D, User Manual

Page: 9 / 202

7
[OPERATION PRECAUTIONS]
[DISPOSAL PRECAUTIONS]
[TRANSPORTATION PRECAUTIONS]
CAUTION
●
Construct an interlock circuit in the program so that the whole system always operates on the safe
side before executing control (for data change) of the PLC in operation. Read the manual thoroughly
and ensure complete safety before executing other controls (for program change, parameter change,
forcible output and operation status change) of the PLC in operation. Otherwise, the machine may be
damaged and accidents may occur by erroneous operations.
CAUTION
●
Please contact a certified electronic waste disposal company for the environmentally safe recycling
and disposal of your device.
●
When disposing of batteries, separate them from other waste according to local regulations. (For
details on the Battery Directive in EU countries, refer to

Page 193 Handling of Batteries and
Devices with Built-in Batteries in EU Member States.)
CAUTION
● When transporting the PLC with the optional battery, turn on the PLC before shipment, confirm that
the battery mode is set using a parameter and the BAT LED is OFF, and check the battery life. If the
PLC is transported with the BAT LED ON or the battery exhausted, the battery-backed data may be
unstable during transportation.
● The PLC is a precision instrument. During transportation, avoid impacts larger than those specified in
the general specifications (

Page 30 Generic Specifications) by using dedicated packaging boxes
and shock-absorbing palettes. Failure to do so may cause failures in the PLC. After transportation,
verify operation of the PLC and check for damage of the mounting part, etc.
● When transporting lithium batteries, follow required transportation regulations. (For details on the
regulated products, refer to

Page 193 Handling of Batteries and Devices with Built-in Batteries in
EU Member States.)
●
When fumigants that contain halogen materials such as fluorine, chlorine, bromine, and iodine are
used for disinfecting and protecting wooden packaging from insects, they cause malfunction when
entering our products. Please take necessary precautions to ensure that remaining materials from
fumigant do not enter our product, or treat packaging with methods other than fumigation (heat
method). Additionally, disinfect and protect wood from insects before packing products.