35
3. How to Set up
3.13. Settings for Special Display Pattern P00
(Hereafter same as the setting menu 1)
Note
1. The following measuring items cannot be set in the display pattern of P00.
Set them in the setting menu 3 and 8.
・
Harmonic current, Harmonic voltage, Operating time
2. It is not possible to specify phases of current and voltage. In the operating mode,
press to switch the phase.
3. The following measuring items can be set for 3-phase 4-wire system only.
・
Current N-phase, Current demand N-phase
③
VT/Direct voltage
DISPLAY
Return to the setting
of the upper line in
the screen 4-1.
PHASE
Continued form the previous page.
(6) You will set up the display of screen 4-2.
Select
“yES” with or and then press .
*
When the screen 2 is not necessary to display,
select
“no” and press .
(7) Set the first line to
“W” in the screen 4-2.
Select
“W” with or and then press .
(8) Set the second line to
“var” in the screen 4-2.
Select
“var” with or and then press .
(9) Set the third line to
“PF” in the screen 4-2.
Select
“PF” with or and then press .
(10) Set the fourth line to
“Wh” in the screen 4-2.
Select
“Wh” with or and then press .
(11) Set the screen 4-3 to hidden.
Select “no” with or and then press .
Note: When you set the screen 4-3 to hidden,
the screen 4-4 is automatically set to hidden.
＋
－
SET
＋
－
SET
＋
－
SET
＋
－
SET
＋
－
SET
SET
SET
SET
SET
SET
SET
＋
－
SET
