- 37 -
5. Operation
5.1
Basic Operation
The following explains basic usages during operation.
Switch display
By pressing
, the measurement
display will switch over.
Switch phase
By pressing
, the current phase and
the voltage phase will switch over.
Display items and the order differ depending on the phase wire
method setting display pattern settings and additional screen.
For more information about detailed display patterns,
refer to pages 45.
The phase cannot be switched in the following cases.
・
Measurement elements without phase (Frequency)
・
Active power and power factor for settings
other than 3-phase 4-wire
・
When the setting is 1-phase 2-wire
DISPLAY
PHASE
Example of phase switching (Phase wire System: 3-phase 4-wire)
Current average
Active Power (total)
Voltage average (line to neutral)
PHASE
PHASE
PHASE
PHASE
PHASE
PHASE
PHASE
PHASE
Current phase 1
Active Power phase 1
Voltage phase 1N
Current phase 2
Active Power phase 2
Voltage phase 2N
Current phase 3
Active Power phase 3
Voltage phase 3N
Current average
Active Power (total)
Voltage average (line to line)
Current phase 1
Active Power phase 1
Voltage phase 12
Current phase 2
Active Power phase 2
Voltage phase 23
Current phase 3
Active Power phase 3
Voltage phase 31
Example of display switching
(
Phase wire System: 3-phase 4-wire,display pattern: P01, without additional display
）
<Screen 1 of 4>
Upper: Current
Middle: Active Power
Lower: Voltage
<Screen 2 of 4>
Upper: Current
Middle: Active Power
Lower: Power factor
<Screen 3 of 4>
Upper: Current
Middle: Power factor
Lower: Voltage
When switching screens, the left screen appears momentarily.
This screen indicates the number of the next screen being
displayed in the total number of screens.
Screen number display
DISPLAY
DISPLAY
DISPLAY
DISPLAY
<Screen 4 of 4>
Upper: Current
Middle: Not displayed
Lower: N-phase current
