- 18 -
DISASSEMBLY
ax3
A
B
Terminal cover ASSY
1. Removal of the terminal cover
ASSY
1. Loosen the three screws (a) as shown in Fig. 3-1.
2. Open the bottom of the terminal cover ASSY outward
(as shown by the arrow (A)) as shown in Fig. 3-1.
3. Slide the top of the terminal cover ASSY to the front
for removal (as shown by the arrow (B)) as shown in
Fig. 3-1.
Fig. 3-1
ax4
bx2
cx2
dx1
Alarm unit ASSY
Alarm cover U
BOO PCB ASSY
BOO SUB PCB ASSY
Fig. 3-2
2. Removal of the BOO PCB ASSY
and BOO SUB PCB ASSY
1. Remove the terminal cover ASSY according to “1.
Remove of the terminal cover ASSY”.
2. Remove the four screws (a) as shown in Fig. 3-2.
3. Remove the alarm unit ASSY as shown in Fig. 3-2.
4. Remove the two screws (b) as shown in Fig. 3-2.
5. Remove the alarm cover U as shown in Fig. 3-2.
6. Remove the two screws (c) as shown in Fig. 3-2.
7. Remove the BOO PCB ASSY as shown in Fig. 3-2.
8. Remove the screw (d) as shown in Fig. 3-2.
9. Remove the BOO SUB PCB ASSY as shown in Fig.
3-2.
Summary of Contents for LC62 CHASSIS XL6500LU
