Mitsubishi Electric FR - F700, Programming Manual

Page: 46 / 216

39
Inverter status monitoring, special registers
for control
1
PL
C F
UNCT
ION
1.10.8 Monitor setting selection(D9215 to D9218)
Set the names and units of monitored items for each of D9216, D9217, and D9218
using the PR command.
(Refer to page 193.)
To display the names and the units of the monitored items, which are set by D9216 to
D9218, on FR-PU07-01, set "40, 41, or 42" in
Pr.774
to
Pr.776
. (Refer to the
Instruction
Manual of the inverter
for the details of
Pr.774
to
Pr.776
.)
Set D9215 as shown below to display the monitored values, which are set by D9216 to
D9218, with decimal points.
<Setting of D9215>
* The bits other than the ones above are ignored.
<Displayed decimal point setting>
Setting example:
1. To display the D9216 monitor without a decimal point in the first monitor
•
Set H0000 in D9215.
•
Set "40" in Pr.774 .
2. To display the D9216 monitor in 0.1 increments in the first monitor and the D9218
monitor in 0.001 increments in the second monitor
•
Set H3100 in D9215.
•
Set "40" in Pr.774 and "42" in Pr.775 .
Device Monitored item Pr.774 to Pr.776 setting
D9216 User monitor 1 40
D9217 User monitor 2 41
D9218 User monitor 3 42
bn+1 bn Unit
0 0
1 increment
(without decimal point)
0 1 0.1 increment
1 0 0.01 increment
1 1 0.001 increment
B15 B12B11 B8B7 B4B3 B0
Select the displayed decimal point for the D9216 monitor.
Select the displayed decimal point for the D9217 monitor.
Select the displayed decimal point for the D9218 monitor.