Mitsubishi Electric FR-CC2-P, Instruction Manual

Page: 136 / 184

Checking parameters changed from their initial values (Initial value change list)
PARAMETER
135
5
5.10
Checking parameters changed from their
initial values (Initial value change list)
NOTE
• The initial value change list can be used also for parameter setting.
Parameters changed from their initial values can be displayed.
Operation
1.
Screen at power-ON
The monitor display appears.
2.
Parameter setting mode
Press to choose the parameter setting mode. (The parameter number read previously appears.)
3.
Selecting the parameter number
Turn to (initial value change list), and press .
" " appears.
4.
Checking the initial value change list
Turn . The parameter numbers that have been changed from their initial value appear in order.
 If is pressed with parameters that have been changed, the parameter settings can be changed as they are. (Parameter
numbers are no longer displayed in the list when they are returned to their initial values.)
Other changed parameters appear by turning .
 " " appears again when the last changed parameter is displayed.