Mitsubishi Electric DX-TL910U, Installation And Operation Manual

Page: 69 / 96

69
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
Various playback functions
Various playback functions that can be operated using the
JOG dial and SHUTTLE ring keys are featured on this unit.
If this unit is prompted to receive a live image
while playing back, this unit will end playback.
While this unit is being prompted to receive a live
image while transmitting, this unit cannot play back.
■
Playing still frames
1. Press the PAUSE button during playback.
• The unit switches to still frame playback. Press the button
again to resume playback.
• If a camera number (1 ~ 9) button is pressed during single
screen still frame playback, the video of the camera number
button pressed will be displayed by searching forward.
Image playback displays only one picture. Press
the camera button to perform search. When a
camera number without a recorded image or few
recorded images is specified, search may continue
for hours. If it is unnecessary, press the SEARCH
button to release search status.
■
Shuttle viewing/direct shuttle viewing
Turning the SHUTTLE ring during still frame playback, play-
back or reverse playback, the playback speed can be
changed.
1. (During shuttle viewing • • • )
Turn the SHUTTLE ring during still frame playback.
• The playback speed depends on the angle the SHUTTLE
ring is turned.
• When letting go of the SHUTTLE ring, the ring will return to
the center and the unit will return to still frame playback.
2
3
4
5
6
7
8
1 High-speed rewind (1GB units)
2 Reverse speed search (100MB units)
3 Reverse speed search (10MB units)
4 Reverse speed search (1MB units)
5 Still frame playback
6 Forward speed search (1MB units)
7 Forward speed search (10MB units)
8 Forward speed search (100MB units)
9 High-speed fast forward (1GB units)
1
9
2. (During direct shuttle viewing • • • )
Turn the SHUTTLE ring during playback or reverse playback.
• The playback speed depends on the angle the SHUTTLE
ring is turned.
• When letting go of the SHUTTLE ring, the ring will return to
the center and the unit will return to still frame playback. (The
unit will not return to playback or reverse playback.)
■
Shuttle hold
The playback speed can be maintained even when letting
go of the SHUTTLE ring during shuttle viewing.
1. Press the PAUSE (SHUTTLE HOLD) button while holding
the SHUTTLE ring in angle during shuttle playback.
2. Let go of the SHUTTLE ring.
• The playback speed is maintained.
• To cancel shuttle hold, press the PAUSE button. The unit
will switch to still frame playback.
■
Frame-by-frame playback
1. Turn the JOG dial during still frame playback.
• Clockwise : Forward frame feeding.
• Counterclockwise : Reverse frame feeding.
• Clockwise and hold : Continuous forward frame feeding.
• Counterclockwise and hold : Continuous reverse frame
feeding.
• When turning of JOG dial is stopped : Unit returns to still
frame playback.
During frame display in the single screen mode,
the frame display operation may not operate cor-
rectly when the JOG dial is turned too fast since
frame display is performed while searching the video
of the display camera number.
■
Reverse playback
1. Press the REV. PLAY (REVERSE PLAYBACK) button while
playback is stopped.
• Playback will be made in the reverse direction. Playback
will stop when press the STOP button.
When reverse playback is performed first after
turning the power on, the last recorded video will be
played back in reverse first.
■
High-speed fast-forward/high-speed rewind
1. Turn the SHUTTLE ring for more than 1 second while
playback is stopped.
• Clockwise for more than 1 second :
Will activate High-speed fast-forward playback (1GB units).
• Counterclockwise for more than 1 second :
Will activate High-speed rewind playback (1GB units).
• Press the STOP button: Playback is stopped.
During high-speed fast-forward/rewind, the current
position is displayed on the bottom or top of the screen.
S (start) and E (end) indicate the beginning and end of
the HDD space and “I” indicates the current position.
S E
current position
■
Changing playback intervals
Although, playback and reverse playback use the same
interval as that for recording, it is possible to change the
playback interval. This function is useful for slow-motion
playback of fast-moving footage, or quick playback of ex-
tensive footage without skipping frames.
1-1. (To play back recording with fast motion slowly • • • )
Press the REV. PLAY (REVERSE PLAYBACK) button during
playback or reverse playback.
• Playback or reverse playback will be made at 0.125P intervals
per camera.