- 58 -
[Fig. V. 1.(2).1]
(A)
(B)
(A)
(B)
(C)
(E)
(E)
PE
PE
PE
(D)
PE
(D)
(D)
(F)
PWFY-P100VM-E-BU
PWFY-EP100VM-E1/E2-AU
Caution:
Do not use anything other than the correct capacity breaker and fuse. Using fuse, wire or copper wire with too
large capacity may cause a risk of malfunction or fire.
(A) Breaker for current leakage
(B) Local switch or breakers for wiring
(C) PWFY-P100VM-E-BU
(D) PWFY-EP100VM-E1/E2-AU
(E) Pull box
(F) PAC-SV01PW-E
(2)-3 When a solenoid valve kit is connected
• Connect the solenoid valve kit TB2 and PWFY TB2.
• Run the power supply wire through the access hole for power supply wire on the PWFY unit. If the hole is already
used to run other wires from the existing PWFY units, use any other wire access holes except the control wire access
hole.
[Fig. V. 1.(2).2]
TB2
TB2
L N
L N
(A)
(B)
(A) PWFY-P
-
VM-E-AU
(B) PAC-SV01PW-E
