Mitsubishi Electric CITY MULTI PUMY-P200YKM3, Service Manual

Page: 108 / 127

OCH791 _108
13 REMOTE CONTROLLER
13-1. Remote controller functions
13-1-1. PAR-41MAA
Controller interface
4 3 2
1
6
Fri
Room
Set temp.
Mode Temp. Fan
Cool Auto
Main display Main menu
Function guide
Main Main menu
Energy saving
Main display:
Cursor
Operation
Vane·Louver·Vent. (Lossnay)
High power
Comfort
Menu screen
Function buttons
Fri
Room
Set temp.
Mode Temp. Fan
Cool Auto
5
F1 F2 F3 F4
Note:
• The functions of the function buttons change depending on the screen. Refer to the button function guide that ap-
pears at the bottom of the LCD for the functions they serve on a given screen. When the system is centrally con-
trolled, the button function guide that corresponds to the locked button will not appear.
1. ON/OFF button
Press to turn ON/OFF the indoor unit.
2. Select button
Press to save the setting.
3. Return button
Press to return to the previous screen.
4. Menu button
Press to open the main menu.
5. Backlit LCD
Operation settings will appear.
When the backlight is off, pressing any button, except for the ON/OFF button, turns the backlight on, and it will stay
lit for a certain period of time depending on the screen.
6. ON/OFF lamp
This lamp lights up in green while the unit is in operation. It blinks while the remote controller is starting up or when
there is an error.
F1: Function button 1
Main display: Press to change the operation mode.
Menu screen: The button function varies depending on the screen.
F2: Function button 2
Main display: Press to decrease temperature.
Main menu: Press to move the cursor left.
Menu screen: The button function varies depending on the screen.
F3: Function button 3
Main display: Press to increase temperature.
Main menu: Press to move the cursor right.
Menu screen: The button function varies depending on the screen.
F4: Function button 4
Main display: Press to change the fan speed.
Menu screen: The button function varies depending on the screen.
Display
The main display can be displayed in 2 different modes: ˝Full˝ and ˝Basic˝. The initial setting is ˝Full˝. To switch to the
˝Basic˝ mode, change the setting on the Main display setting. (Refer to operation manual included with remote controller.)