LS700BS 7 Ton Petrol Logsplitter
8
Original Instructions Version April 13
3. Familiarize yourself with the controls and features of
this log splitter as shown in the illustrations.
1. Transport Handle
2. Ram Travel Adjusting Rod
3. Split Wedge
4. Ram
5. Control Levers Connection Bracket
6. Top Motor Shield
7. Fuel Tank
8. Wheels
9. Base
10. Oil Tank Cover / Air Bleeder
11. Table Lock Down Hook
12. Support Table
13. Side Bracket for Support Table
14. Front Bracket for Support Table
15. Control Lever
16. Control Lever Guard
17. Adjustable Log Holder
18. Log Holder Adjusting Knob
Bleed the air out of the hydraulic system before starting the log splitter.
The bleed screw should be loosened by two rotations until air can go
in and out of the oil tank smoothly. Air flow through the oil tank filler
should be detectable during the operations. Before moving the log
splitter, make sure the bleed screw is tightened to avoid
oil leaking from this point.
THE FAILURE TO LOOSEN THE BLEED SCREW WILL
RESULT IN DAMAGE TO THE SEALS OF THE
HYDRAULIC SYSTEM AND CAUSE PERMANT
DAMAGE TO THE LOG SPLITTER.
DELIVERING THE LOG SPLITTER TO THE WORK SITE
The log splitter is equipped with 2 wheels for minor moving. To
move the log splitter to the work site. Grip the handle (A) to tilt
the log splitter slightly after making sure the bleed screw is
tightened.
If using a crane, lay hoist sling around the housing. Never try to
lift the log splitter at the Handle (A).
