LS700BS 7 Ton Petrol Logsplitter
11
Original Instructions Version April 13
Read dipstick to determine the maximum and minimum oil level.
To check the hydraulic oil, unscrew the oil filler plug and wipe the dip
stick rod with a clean cloth. Next insert the dip stick into oil tank without
screwing it into the tank. The oil should be between the markings Min
and Max. Top up the oil if necessary.
Low oil can damage the oil pump. Overfilling can result in
excessive temperature in the hydraulic transmission system.
SHARPENING WEDGE
This log splitter is equipped with a reinforced splitting wedge with a specially treated blade. After long periods of operation, and
when required; sharpen the wedge using a fine-toothed file removing any burrs or flat spots on the edge.
TROUBLESHOOTING
PROBLEM
PROBABLE CAUSE
REMEDY SUGGESTED
Engine does not start
Engine oil level is low
Fill engine with oil to correct level
Ignition switch is OFF
Set ignition to ON
Log Splitter does not work while motor
running
Bleed valve is not opened
Open bleed valve
Control Levers or Connection parts bent
Replace the damaged parts
Low hydraulic oil level
Check and refill hydraulic oil
Log Splitter works with
abnormal vibration and noise
Low hydraulic oil level
Check and refill hydraulic oil
If the solutions above fail to resolve the problem or the machine is not safe to use then contact the suppying dealer.
HYDRAULIC
PLUMBING DIAGRAM
