LS700BS 7 Ton Petrol Logsplitter
4
Original Instructions Version April 13
UNDERSTAND YOUR MACHINE
Read and understand the operator’s manual and labels affixed to the machine. Learn its
application and limitations as well as the specific potential hazards peculiar to it.
Be thoroughly familiar with the controls and their proper operation. Know how to stop the
machine and disengage the controls quickly.
Make sure to read and understand all of the instructions and safety precautions as outlined
in the Engine Manual, packed separately with your unit. Do not attempt to operate the
machine until you fully understand how to properly operate and maintain the Engine and
how to avoid accidental injuries and/or property damage.
WORK AREA
Never start or run the engine inside a closed area. The exhaust fumes are dangerous,
containing carbon monoxide, an odorless and deadly gas. Operate this unit only in a well
ventilated outdoor area.
BURN RISK
Take care not to touch the hot muffler/exhaust, gear housing and cylinder.
TABLE OF CONTENTS
Safety Warnings & Cautions .….….….….….….….….….….….…………………………………………………………………..........2
Application Conditions ....….….….….…………….….….….….……………………………………………………………….…….....5
Specifications….….….……………………………….….….….….….………………………………………………..........5
Contents of Container …..….….….….….….….….….….….….….…………………………………………………………………. .....6
Set up and Preparation for Operation…….……….….….….….….….….….….…………………………………………………….......6
Delivering Log Splitter to Work Site ..….….….….….….….….….….….….….….….…………………………………......................................7
Log Splitter Operation ...........…….….….….….….….….….….….….….………………………………………………………. ...................8
Replacing Hydraulic Oil ……….….….….….….….….….….….………………......…………………………………………………....9
Sharpening Wedge ............…….….….….….….….….….….….….….………………….............……………………………………….....10
Trouble Shooting ………………….….….….….….….….….….….….……………………………………………….............………....10
Wiring Diagram ………………….….….….….….….….….….….………………………………….……………………………..........10
Hydraulic Plumbing Diagram ………………….….….….….….….….….….….……………………………………………......…….10
Parts Schematic .....…………….….….….….….….….….….….….….….….….……………………………...........................................................11
Declaration of Conformity….….….….….….….….….….….….….….….….……………………………...........................................................14
