Mitel Navigator 3300 ICP, Hardware User'S Manual

Page: 135 / 266

Installing
Release 3.3 127
9. Click Yes to stop any Internet Services. The install shield will then install Oracle followed
by Mitel Utilities.
10. Close the C:\WINNT\SYSTEM32\cmd.exe window.
11. Click Finish .
12. Reboot the PC.
13. Install and configure the Java Plug-in.
14. Configure FTP Username and Password.
15. Assign Domain Accounts.
16. Configure IIS 5 settings.
17. Copy the identitydb.obj file to your local directory.
18. Connect the 3300 Configuration Tool PC to the 3300 ICP Controller using both a serial
connection and a network connection.
Install and Configure the Java Plug-In
Install the Java Plug-in on the 3300 Configuration Tool PC from the following URL:
http://servername/opsclient where servername is the netbios name of the 3300
Configuration Tool platform.
After you have installed the plug-in, you must set the parameters as follows:
1. From the Start menu, point to Programs , and click Java Plug-in ControlPanel .
2. Click Basic .
3. Enter the following parameter: Network Access: Unrestricted or Applet host (do not select
None).
4. Use the default settings for the parameters in the Advanced and Proxies property sheets.
5. Click Apply .
The 3300 Configuration Tool PC, operating on Windows NT 4.0 or Windows 2000 Professional,
is connected to the 3300 Controller through a serial connection and a network connection. The
PC must be equipped with an Ethernet card, an Ethernet cable, a communications program, a
serial port (use Hyperterminal default settings), and a serial cable.
Program FTP User Account and Password
Windows 2000
To program the FTP User Account and Password:
1. Click Start , point to Programs , point to Administrative Tools , and then click Computer
Management .
2. Click Local Users and Groups .
3. Click Users .
Note: The installation information for the 3300 Configuration Tool is also available on the
3300 Configuration Tool software CD.