manualshive.com logo in svg

Mitel Navigator 3300 ICP, Hardware User'S Manual, Page: 191 / 266

Share
Download
Mitel Navigator 3300 ICP Hardware User'S Manual Download Page 191

Install Upgrades and FRUs

Release 3.3

183

250 User System - Add 64 Compression Channels

250 user system (Release 3.0/3.1 chassis) upgrade to add support for 64 compression channels 
requires a new Release 3.2 chassis.

The 250 user, 64 compression channel upgrade package includes:

•

One 300 MHz RTC

•

One 300 MHz E2T

•

One 64 Channel Echo Canceller

•

One Dual FIM

•

One DSP Module (21061/21161) for telecom support

Add the following modules:

•

Two DSP Modules (21161) for 64 compression channels

This provides:

•

Four DSP devices (21061/21161) for telecom functions for up to 250 users

•

Eight DSP devices (21161) for 64 channels of compression

Note: 

Some controllers in release 3.0 had the DSP installed in Slot 6. This DSP should 

be moved to Slot 8 before installing the compression DSP in Slot 3.

Note: 

Retain your System ID Module and Hard Drive.

Note: 

You must purchase compression licenses. Refer to E2T Compression for 

guidelines on meeting your compression requirements.

Summary of Contents for Navigator 3300 ICP











































































































































































































































































Reviews:

No comments