manualshive.com logo in svg

Mitel 5760, User Manual

Share
Download
Mitel 5760 User Manual Download Page 79

Chapter 5 Video and Audio Adjustments

Mitel Networks 5760 VC User’s Guide

5-13

5.2

Adjusting the Audio

The 5760 VC supports various and powerful audio features:

q

Increasing, decreasing or muting the volume of incoming and outgoing audio

q

Switching between different local microphones and other audio sources

q

Setting VCR mixing options

q

Setting audio options to support special environments

Adjusting the Volume

You can adjust the volume at any time, in or out of a videoconference, when a 
dialog box is open or when the screen is clear. The following volume controls are 
available:

•

Increase or decrease the volume of the incoming audio

•

Mute the incoming audio

•

Mute the outgoing audio

É

To adjust the volume of incoming audio 

É

To mute the speaker

É

To mute the microphone

1.

Press the right volume button to increase the volume, or press the 
left volume button  to decrease the volume.

Volume Level

Press Mute <Speaker>. An animated picture on the bottom of the 
screen indicates that the speakes are muted.

To restore the speaker, press Mute <Speaker> again.

Press Mute <Microphone>. An animated picture on the bottom of the 
screen indicates that the microphone is muted.

To restore the microphone, press Mute <Microphone> again.

Summary of Contents for 5760



































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands