R000226 BP1 Automation
5
v.0.1 03/21
3
INPUTS & OUTPUTS
The BP1 control board has been designed specifically to interface to a Barco Series 2
projector with an Alchemy ICMP-X IMB. The BP1 connectors are designated accordingly.
You may use a different method of controlling the unit, but custom cabling may be
required. Or you may assign different functionality to the connectors than the default
functions listed below, if desired.
All connections between the BP1 and projector use 8-pin, RJ-45 connectors. The cables
used may be modular type or Local Area Network cables, i.e. CAT 5, CAT6, etc, however
they are
not
used as network cables. Cables must be 1:1 straight-through, not a
crossover type.
In the table below, refer to the connectors as designated in Figure 3-1.
Figure 3-1: Control Board