background image

 

R000226 BP1 Automation 

26 

v.0.1 03/21 

Standard Product Warranty 

 

WARRANTY, DISCLAIMERS AND LIMITATION OF LIABILITY 

  
Unless otherwise noted, all Moving Image Technologies products are covered by the 
warranty set forth in the following paragraphs. 
 
The warranty is extended only to the purchaser of the Products directly from Moving 
Image Technologies, or an authorized dealer of Moving Image Technologies, as new 
merchandise. For a period of twelve (12) months from the date of original delivery to 
Buyer, the Products are warranted to be free from functional defects in materials and 
workmanship, provided they are operated under condition of normal use, and that 
repairs and replacements are made in accordance herewith. Moving Image 
Technologies does not warrant consumable components. The foregoing warranty shall 
not apply to Products that have been disassembled, altered or repaired other than by 
Moving Image Technologies (or by a Moving Image Technologies certified technician) or 
if the Product has been subject to abuse, misuse, negligence or accident. 
 
Moving Image Technologies sole and exclusive warranty obligation and Buyer's sole and 
exclusive warranty consists of Moving Image Technologies, at its option, repairing or 
replacing free of charge Products: (a) which contain a defect covered by the above 
warranty; (b) which are reported in writing to Moving Image Technologies not later than 
seven (7) days after the expiration of the twelve month warranty period; (c) which are 
returned to Moving Image Technologies promptly after discovery of the defects; and (d) 
which are found to be defective by Moving Image Technologies upon examination. Buyer 
shall pay all transportation charges. 
 
Moving Image Technologies shall not be otherwise liable for any damages, including, 
without limitation, loss of profits or overhead, reimbursement, personal injury or property 
damage. The aforesaid warranty obligation of Moving Image Technologies constitutes its 
sole liability, and under no circumstances, shall the maximum liability of Moving Image 
Technologies under any legal theory (e.g. Contract, warranty, negligence, promissory, 
estoppels, strict liability, misrepresentation, tort) and for any reason whatsoever (e.g. 
Defect, delay or otherwise) exceed the purchase price of the defective part, regardless 
whether the claim is asserted by buyer or any other person or entity. The liabilities of 
Moving Image Technologies, as above set forth, shall not be extended because of 
advice given by it in connection with the design, installation or use of the products or 
parts thereof. 
 
There are no express or implied warranties which extend beyond the warranties set forth 
above. Moving Image Technologies makes no warranty of merchantability or fitness for a 
particular purpose with respect to the products or any parts thereof.

 

 

 
This warranty is subject to change at any time without notice. 

 

 

 

Summary of Contents for A000392




























Reviews: