4
Chapter 1: Overview
M150/M850 at a Glance
Each RTU is packaged with everything
necessary for a standard installation
Enclosures
NEMA 1—indoor mounting
NEMA 4X—outdoor mounting
FlatPak—control panel inner door mounting
FlatPak Retrofit—(convert M110 or M800
to MyDro)
Hardware Included with RTUs
RTU with NEMA 1, NEMA 4X, or FlatPak enclosure
RTU Installation Packet: RTU Form, User Guide, and emergency notice label
Battery—12 volt, 5 amp-hour
Flying Lead Transformer—120 VAC to 12 VAC, 1.2 amp
Universal Antenna Mount Kit: 11’ RG58 cable with SMA-M connector, pole, or wall
mount bracket, dual-band antenna whip, mini whip antenna, (2) pole clamps, and
(2) MOVs rated for 120-volt control circuits
Accessory Bag: (4)1000 ohm long, yellow EOL resistors, (8) 1000 ohm EOL
resistors, (2) current sensing switches, tie wraps, (4) wire nuts, (8) screws, (2)
ferrite cores, and an interchangeable Phillips/flathead screwdriver
New customers will also be given a New Customer Packet which includes Account and
Notification Setup Forms, (5) electronic keys with instructions, and the Managed SCADA
document.
