Attach the stand base to
the pole. Connect securely
by using the M3 screw
provided.
Thread the speaker cable
through the bung and then
slot the bung into the stand.
Place the satellite on the pole
and screw the stand
connector to the stand using
the 2 x M3 screws.
Pass the speaker cable
through the stand base.
Then, attach the spikes and
locking nuts to the stand
base, using the appropriate
end of the spikes for your
flooring.
Warning: Be careful. Floorstand spikes are very sharp.
When positioning the speakers avoid piercing any
electrical cables etc. under or above the carpet.
Mounting the
M-Cube satellite
to the floorstand
S T E P 1
S T E P 2
S T E P 3
S T E P 4
S T E P 5
S T A G E 2
4 - 5
Hard floors
Carpet
Screw the stand connector
into the satellite using the
long M6 screw provided.
Note that the connector
between the satellite and
bracket has a locating device
that will only fit one way.
m-cube sats manual 03-11-04.qxd 15/12/2004 08:23 Page 7
