If your bass sounds excessively
boomy when listening to stereo
sources (eg. CD), set the subwoofer
to ‘OFF’ in your AV receiver’s speaker
setup (see troubleshooting guide for
more information).
Using the speaker cable supplied,
connect each M-Cube satellite (pic 1)
to the appropriate binding posts on
the M-Cube subwoofer (pic 2),
observing the correct polarity.
Alternatively, connect directly to your
AV receiver.
In your AV receiver’s speaker setup,
set all speakers to ‘LARGE’.
In your AV receiver’s speaker setup,
set the subwoofer to ‘ON’.
In your AV receiver’s speaker setup,
set the listening distance for each
satellite, and adjust the level of each
satellite channel to give the same
volume at the listening position. If
you are unsure, set each channel to
the same level.
Setting up
the M-Cube
satellites
S T E P 1
S T E P 2
N O T E
S T E P 3
S T A G E 3
pic 1
pic 2
m-cube sats manual 03-11-04.qxd 15/12/2004 08:23 Page 8
