Offer the mounting bracket to the wall
and mark the positions for 2
mounting points. Having selected
fixings appropriate to the mounting
surface, drill 2 holes to accommodate
the fixings.
Attach the mounting bracket
to the wall using appropriate
countersunk screws (not supplied).
Attach the wall bracket to the
mounting bracket by sliding down
vertically.
Loosen the locking mechanism screw
using the Allen key provided. Set the
pitch of the wall bracket arm as
desired, and re-tighten the locking
mechanism screw.
Mounting
the M-Cube
satellite to
the wall
S T A G E 1
S T E P 1
S T E P 2
S T E P 3
S T E P 4
Screws/fixings not supplied
Attach the satellite and connector to
the wall bracket using the M6 screw
provided. Before tightening fully,
swivel the satellite to the desired
angle.
Note that the connector between the
satellite and bracket has a locating
device that will only fit one way.
m-cube sats manual 03-11-04.qxd 15/12/2004 08:23 Page 6