INSTALLATION BEFORE USING
1. Please remove all the sticker and poly bag from the appliance.
2. Before the first use or after a period of prolonged storage, thoroughly wash the pitcher in
soapy water then rinse and dry completely. Note: Do not wash or soak the pitcher base with
water, it must completely dry before using.
3. Wipe the outside of the vacuum blender with a damp cloth. Do not soak it in water.
8. Install the pitcher into the main body. Align the base of the pitcher to match the grooves of the
main body.
9. Then, lower the vacuum arm down onto the top of the pitcher.
10. Connect the appliance to the power source and turn on the hard power switch button on the
back of the unit.
Note: Place the base on a hard, flat and heat-resistant surface so that the machine can operate
stably during the entire operation.
4. Prepare proper ingredients according to
the recipe and cut into pieces and put them
into the glass.
5. Adding water shall not exceed the
highest scale position of water level.
Cut 5 cm
Maximum
water level
6. Install the inner lid into the outer lid,
tighten it clockwise.
Tighten the pitcher lid
7. Close the cup according to the direction
indicated by the pitcher lid.
4. .
Align the handle
