OPERATING INSTRUCTION
Instruction for use
1. After switch on, pres
s the “Start & Cancel” button on the control panel to start up.
2.
Press the “Menu” button to select the preset function (Soy milk / Soup / Grind / Stew / Steam /
Congee / Baby food / Clean / Warm).
Note: please select the corresponding function for your foods. Otherwise the machine will not
work properly.
3. Press the "Start & Cancel" button again to start the work, and it will automatically complete (If
you select the wrong menu, press the "Start & Cancel" button to stop the work and re-select).
4. After a function finish, please disconnect the appliance from the power source first, then take
out the food or drink.
Vacuum function
After starting up the appliance, press the “Menu” button to select the “Vacuum Blend” or
“Vacuum” function and press the “Start & Cancel” button to start the work.
Vacuum blend: the device will pump out all the air in the pitcher then blend the ingredients.
Vacuum: This function is used for leftover food, just put one the storage cup on the machine,
after pump out the air, you can put it in the refrigerator.
Pulse function
After start up the device, press the "Pulse" button, and the device will reach the highest speed in
an instant. It is suitable for instant smashing and disrupt (Long press the "Pulse" button to
continue stirring, release the button to stop working immediately).
Stirring function
1. After start up the device, press the "Blend" button, the display shows level 1 (corresponding
to speed 1), continue to press, the level will increases, the optional level is 1-9.
2. Press the "Start & Cancel" button again to start work (continuous work, auto-complete time
30 seconds).
3. To
stop working, press the “Start & Cancel” again.
Tips:
When the "Blend" function is in use, do not let the machine operate without supervision.
Someone needs to be there to look after the device to avoid any problem.
The "Blend" function can be adjusted the speed, but not the time.
Reservation function
1. Press the "Start & Cancel" button, select the corresponding function, and press the "Preset"
button to set a reservation time (30 minutes as a unit, up to 12 hours can be reserved).
2. Press the "Start & Cancel" button again to start to enter and release the scheduled work
status (the display shows the countdown time, the corresponding function).
Cleaning function
Note: When you want to use this function, you should add water and a little dishwashing liquid to
the pitcher.
1.
Press the “Start & Cancel” button to start up and press the “Menu” to select the “Clean”
function.
2. Press the "Start & Cancel" button again to start cleaning.
