Miscea "Classic", Instruction Manual

Page: 24 / 84

24
4
2
2
5
9
8
5. Use
CAUTION
Always check the temperature before you place your hands in the water stream. Risk of
burning your hands due to hot water.
Filling a bucket
• Place a container under the water outlet.
• Activate sector 3 & 6 at the same time for 1 second. The water starts flowing.
• The water flow stops automatically 10 minutes after the activation.
• To stop the water flow manually, hold your hand over sector 4 or 5 for 1 second.
Adjusting the water temperature
• Check the display for the actual tempera-
ture.
• To adjust the temperature:
• Activate sector 3 to increase the tem-
perature. The sector shows a red light.
• Activate sector 6 to decrease the
temperature. The sector shows a blue
light.
You can adjust the water temperature whilst the water is flowing or when the system is in
standby mode.
You can use one hand to adjust the temperature, and hold your other hand under the water
flow to check the temperature.
5.4 Dispensing liquids
Dispensing soap
• Activate sector 4. The sector shows a
pulsating green light.
• Activate sector 2 and hold your hand
under outlet 9.
Dispensing lotion or disinfectant
• Activate sector 5.The sector shows a
pulsating orange light.
• Activate sector 2 and hold your hand
under outlet 8.
3
6