Miscea "Classic", Instruction Manual

Page: 21 / 84

V 17.04
21
English
CAUTION
• Do not open the water box or break the seal of the water box. If you do, the warranty
becomes void.
• Do not connect the faucet to a water supply that has no strainer. If you do, the warranty
becomes void.
• Do not install hoses when the faucet is switched on or when the power adapter is connected.
• Do not hold any object close to the faucet head when the calibration is in progress. This can
block the light and interfere with the calibration.
• Do not install or store the faucet in a location that has the risk of frost damage.
• Be careful with the power cable of the faucet and the soap box. The connector at the end of
each cable is fragile.
• Do not connect the water box of one set to the faucet of another set. There is a possibility that
the system does not function properly.
• Make sure that the hoses for the liquids are correctly connected.
• Do not cut or kink the hoses.
• Only use the supplied materials to install the system. Only use the power adapter supplied
with the system.
• Use only genuine replacement parts and accessories. The use of other parts will invalidate
the warranty and CE marking and may result in personal injury.
3. Description
3.1 Components
Refer to fig. C for the identification of the components.
1. Faucet (1A, 1B or 1C)
2. Water box
3. Soap box (3a or 3b)
3.2 Identification of the product
Refer to fig. C for the location of the product type labels.
3.3 Application areas
miscea systems can be used in conjunction with:
• Pressurized storage heaters
• Thermally controlled instantaneous heaters
• Hydraulically controlled instantaneous heaters
Operation with low-pressure displacement water heaters is not possible.
The miscea CLASSIC is certified according to EN1717, and is equipped with a DIN-DVGW tested
one-way valves for back-flow prevention.
4. Installation