Paging Modules
2
Paging Modules
The QMP-5100B Master Paging Module has a ribbon cable connection to the first QZP-5101 Zone Selector Module,
and wiring terminals for connection to the QIF-5000B Interface Module in the Audio Cabinet and to the QMT-5300A
or QMT-5302 Telephone Master.
The two DIP Switches, SW1 & SW2 are for configuration.
There are no field configurable jumpers or
potentiometers to adjust; these should be left alone with their factory default settings.
Figure 1: QMP-5100B Master Paging Module
See also the section
Paging Operation
.
The QMP-5101B Master Paging Module has a ribbon cable connection to the first QZP-5101 Zone Module, and
wiring terminals for connection to the QIF-5000B Interface Module in the Audio Cabinet and to the QMT-5300A or
QMT-5302 Telephone Master.
The two DIP Switches, SW1 & SW2 are for configuration.
There are no field configurable jumpers or
potentiometers to adjust; these should be left alone with their factory default settings
.
SW1
1
8
ALL-CALL
MINUS
WARDEN
PAGE
ALL-CALL
A.C. ON
COMMON
TROUBLE
CIRCUIT
TROUBLE
AMPLIFIER
TROUBLE
PAGE INHIBIT
REMOTE
FAILURE
MIC
TROUBLE
MIC
LEVEL
LAMP
TEST
RESET
SW2
1
8
SW1 SW2
ON
OFF
DIGITIZED
MESSAGES
Summary of Contents for QMP-5100B Series
Page 2: ......
Page 4: ...Contents ii...
