Mircom QMP-5100B Series, Installation, Wiring And Operation Manual

Page: 11 / 16

QMP-5100B and QMP-5101B Installation and Operation Instructions
7
Paging Operation
This section describes the controls and indicators on the QMP-5100B and QMP-5101B Master Paging Modules.
QMP-5100B/QMP-5101B Displays
• AC ON Indicates that AC Power is present, green LED, illuminates steadily.
• Common Trouble Indicates any QX-5000 Trouble, flashes, amber LED.
• Mic Trouble Indicates a Microphone Trouble, flashes, amber LED.
• Mic Level Indicates the Paging Audio Level, green LED.
• Amplifier Trouble Indicates any QX-5000 Amplifier internal Trouble.
• Circuit Trouble Indicates any QX-5000 Amplifier field wiring Trouble.
• Remote Failure Indicates an RS-485 Communications Failure.
• Page Inhibit Indicates that Mic or Warden Paging is Inhibited.
• Digitized Messages Indicates that the Digitized Voice message is active, green LED, illuminates steadily.
• All-Call Indicates that the All-Call function is active, green LED, illuminates steadily. This LED
will not function if the DIP Switch SW1-5 is set to ON.
• All-Call Minus Indicates that the All-Call Minus function is active, green LED, illuminates steadily.
This LED will not function if the DIP Switch SW1-5 is set to ON.
• Warden Page Indicates that the Warden Page function is active, green LED, illuminates steadily.
QMP-5100B/QMP-5101B Controls
• Reset Performs a Reset of the QMP-5100B/5101B only (not the fire alarm) .
• Lamp Test Momentarily activates all LED Indicators.
• All-Call Selects all Zones for Voice Paging. This button will not function if DIP Switch SW1-5
Automatic All-Call is set to ON.
• All-Call Minus Inverts the selection of Zones for Voice Paging. This button will not function if DIP
Switch SW1-5 Automatic All-Call is set to ON.
• Microphone PTT The microphone’s PTT (push-to-talk) button, when depressed, causes voice paging
(from the microphone) to be enabled to all Zones selected for paging, unless Page
Inhibit is active.
Note that pressing PTT will not result in any paging activity
unless there are Zones selected for Paging.
• Warden Page Causes voice paging from the Firefighters’ Telephone (if connected) to be enabled to
all Zones selected for paging.
Note that pressing PTT will not result in any paging
activity. Note also that there must be an active Firefighters’ Telephone
connection for Warden Paging to occur.
• Digitized Messages This button does not function.