Miranda Imagestore Intuition+ User Manual Download Page 9 | Manualshive

Page: 9 / 60

background image

Imagestore Intuition User Manual

Preface

Miranda Technologies Ltd

Page 9

Manual Structure

Overview

The overview provides an introduction to the Miranda Technologies Ltd
Imagestore Intuition for new users and describes the functions and features
offered by the product. It includes a simple technical concept of the unit and
details the optional modules that are available to enhance the unit's
capabilities.

Front Panel Operations

This section describes how to operate Imagestore Intuition using the front-
panel controls. Each manual function, feature and parameter is fully
described.

Installation

This section contains details of the unit interconnections and interfaces. It
describes all the set-up procedures required for a successful installation
including reference source selection, internal and synchronisation set-up.

Support

The support section describes the procedures for using the return-to-base
warranty. It explains how to contact the Miranda Technologies Ltd technical
support team and outlines a series of preliminary unit checks that should be
made prior to calling.

Menu Tree

This section contains a listing of the VFD display menu tree.

«
...
7
8
9
10
11
...
»

Summary of Contents for Imagestore Intuition+





























































Reviews:

No comments

Related manuals for Imagestore Intuition+

All in One Printer

Brand: Baracoda Pages: 42

Brand: Renesas Pages: 2

Brand: ebm-papst Pages: 11

Brand: Z-Com Pages: 18

RADEON 9800 PRO

Brand: ATI Technologies Pages: 20

Brand: Comway Pages: 20

Brand: ENERMAX Pages: 33

Brand: EMC Pages: 88

Brand: Jetter Pages: 20

Brand: Rane Pages: 6

Brand: ZyXEL Communications Pages: 114

Brand: Acnodes Pages: 10

Brand: Addi-Data Pages: 20

Brand: Crestron Pages: 2

Brand: Linksys Pages: 17

Brand: Cisco Pages: 26

Linksys WET610N

Brand: Cisco Pages: 78

Brand: Cisco Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands