Miranda Imagestore Intuition+ User Manual Download Page 5

Page: 5 / 60

Imagestore Intuition User Manual

Preface

Miranda Technologies Ltd

Page 5

7. Do not operate in an explosive atmosphere.

To avoid injury or fire hazard, do not operate Intiotion in an explosive
atmosphere.

Product Damage Precautions

8. Provide proper ventilation.

To prevent Imagestore Intuition overheating, provide proper ventilation.

9. Do not operate with suspected failures.

If you suspect there is damage to Imagestore Intuition, have it inspected
by qualified service personnel.

For further safety procedures refer to the Superserver 6023L-8R User’s
manual, section 4 – System Safety.

Certifications and Compliances

The Superserver 6023L-8R complies with

FCC Class B, CE, UL/CUL, TUV

Summary of Contents for Imagestore Intuition+





























































Search results

Summary of Contents for Imagestore Intuition+

Reviews:

Related manuals for Imagestore Intuition+

Brands by name

Popular brands

Miranda Imagestore Intuition+, User Manual

Search results

Summary of Contents for Imagestore Intuition+

Reviews:

Related manuals for Imagestore Intuition+

Brands by name

Popular brands