Miranda Imagestore Intuition+, User Manual

Page: 39 / 60

Imagestore Intuition User Manual Front Panel Operation
Miranda Technologies Ltd Page 39
Network Mask
Gateway Address
Restart-System
Confirm?
Clean-Restart
Confirm?
Update-Software
Disk
Inserted?
Set Standard
Use this option to select the appropriate video line standard. The video
standards listed will depend on installed licenses and output card fitted. After
selecting the new standard and pressing the
enter
ª
key the VFD display will
indicate that the EEPROM is being updated shortly followed by a ‘ New
setting takes effect on restart ’ message.
Restart the Imagestore Intuition.
Note Unload all layers before changing between video line standards.
Select Reference
A Genlock signal is used to synchronise Intuition to the connected
Imagestore providing both units are connected to the same source. SD
Intuition required a BI-Level sync whereas HD Intuition requires a TRI-
Level sync.
To display the Timecode Source press the enter
ª
key.
Reference Standard
The Genlock signal is automatically detected and the standard displayed
should match that of the video line standard selected. If an incorrect standard
or no reference is detected then
Invalid Genlock is reported.
To display the Reference Offset Status press the enter
ª
key.