Miranda Imagestore Intuition+, User Manual

Page: 42 / 60

Front Panel Operation Imagestore Intuition User Manual
Page 42 Miranda Technologies Ltd
Gateway Address
This option displays the units Gateway Address and enables the user to
modify it.
The Gateway Address will be shown on the VFD display with a plus (+) and
minus (-) symbol at either end indicating that the value can be adjusted
between (0 and 255).
The number is in four blocks separated by full stops i.e.
->255<255.255.255+
The factory default option is disabled and should only be modified in
consultation with your IT department.
To adjust the number, refer to the IP Address section (see above).
Pressing the enter key to accept the change will then display the message
‘ Updating EEPROM ’ shortly followed by ‘ New setting takes effect on
restart ’.
Restart the Imagestore Intuition.
NTP Server
This option allows the clock in the Intuition to be set from a Network Time
Protocol server located on the network.
Using the arrow control keys enter the IP address of your NTP server. (See IP
Address).
The number is in four blocks separated by full stops i.e.
->255<255.255.255+
The factory default option is disabled and should only be modified in
consultation with your IT department.