manualshive.com logo in svg

Miranda DENSITE IRD-3802, Manual To Installation And Operation, Page: 5 / 47

Share
Download
Miranda DENSITE IRD-3802 Manual To Installation And Operation Download Page 5

GUIDE TO INSTALLATION AND OPERATION 

IRD-3802  |  

5

  

1  IRD-3802 HD/SD MPEG Decoder with ASI and GigE IP inputs 

 

1.1 Introduction 

 

The IRD-3802 combines MPEG-2 and H.264 decoding of ASI and IP transport streams to either HD or SD, 
with processing of key video and audio parameters and signal probing functions for feed aggregation, 
distribution, and monitoring applications by broadcasters and TV services providers. 

 

DVB-ASI or IP transport streams fed to the IRD-3802 can be decoded to provide either HD or SD SDI video 
with embedded multi-channel audio, in all leading formats, as well as composite video and stereo analog 
audio for monitoring. With its Gigabit Ethernet port, the IRD-3802 can also act as a gateway, by performing 
IP encapsulation of the input transport stream in either RTP or UDP mode. 

 

The IRD also provides convenient optional high video signal processing with frame synchronization and 
selectable delay as well as Up/Down/Cross conversion and aspect ratio conversion. The IRD can decode an 
extensive range of metadata, such as CEA-608 compliant Closed Captioning, AFD, V-chip and DVITC time 
code, that can be embedded in the decoded SDI signal. Transport Stream metadata such as PSIP can also 
be analyzed. 

 

The audio processing capabilities of the IRD-3802 are also extensive with dual audio decoding and 
selectable stereo downmix modes of decoded MPEG-1 and Dolby Digital (AC-3) 2.0 audio. Optionally, the 
IRD-3802 also performs decoding of Dolby Digital (AC-3) 5.1 audio, with discrete 6-channel output. 

 

In addition, the IRD-3802 performs a wide range of signal quality probing, with user-defined alarm settings on 
an extensive range of transport stream parameters, including TR 101290 alarms, transport stream structure 
analysis and individual program statistics. 

 
 

1.2 Features 

 

Input/Output Versatility 

•

 

Dual ASI transport stream inputs 

•

 

Single ASI transport stream output for signal monitoring or retransmission 

•

 

IP transport stream input/output: an ASI signal can be re-transmitted as IP and an IP stream can be 
forwarded as ASI 

•

 

IRD acts as IP video gateway and even allows de-multiplexing of the ASI stream to send selected 
programs on the IP stream with forward error correction (FEC) for improved quality 

•

 

Dual HD/SD SDI outputs 

•

 

Composite video and stereo analog audio monitoring outputs 

 
Easy Input and Program Selection 

•

 

Manual or automatic input selection mode 

•

 

Automatic mode allows switching to backup input upon loss of signal on active input, with adjustable 
duration 

•

 

Program selection using local control or iControl 

•

 

Extensive transport stream structure is displayed allowing easy identification of individual programs in 
an MPTS 

•

 

MPTS automatic program selection mode and recovery 

 
 
 

Summary of Contents for DENSITE IRD-3802
















































Reviews:

No comments