GUIDE TO INSTALLATION AND OPERATION
IRD-3802 |
17
Currently Selected Service
The Data windows and status icons in this area report on various aspects of the currently-selected service
Service
Use the
MPEG Synchronization
pulldown to select
the synchronization mode:
•
OFF – no clock recovery from PCR packet;
local clock used
•
Auto – try to recover the clock if possible (see
status icon)
If there are lots of errors in the stream, or the IRD-
3802 cannot lock easily on the signal, set to OFF to
avoid switching back and forth
Video
Information only – no controls available
Audio
Use the pulldowns to select the audio PIDs from the
available channels. NOTE that you can’t select the
same PID for both audios
Service Select
Use the Service Select pulldown to choose one of
the available services.
3.4.4 The
Video Output
panel
Input and Output Screens
The two screens at the top of the panel indicate the
aspect ratio of the input and output video. The
pulldowns for Aspect and Format on the output
screen allow the output signal to be formatted
(Note: the Up/Down/Cross option must be enabled
before these controls become active).
AFD tab
Mode
Use the AFD Mode pulldown to select the operating
mode
•
Auto
•
Manual
Config
Use the Insertion pulldown to select whether AFD
information will be inserted in the output.
•
OFF
•
AFD
Figure 3.4
Decoder panel
Figure 3.5
Video Output panel – AFD tab