manualshive.com logo in svg

Miranda DENSITE IRD-3802, Manual To Installation And Operation, Page: 25 / 47

Share
Download
Miranda DENSITE IRD-3802 Manual To Installation And Operation Download Page 25

GUIDE TO INSTALLATION AND OPERATION 

IRD-3802  |  

25

  

3.4.8 The 

Test

 panel 

 
Use the Color Bars checkbox to turn the Test 
function ON or OFF 
 

•

 When 

checked

, the output signal is replaced 

by Color Bars. 

 

•

 When 

unchecked

, the normal program signal 

is present at the output. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

3.4.9 The 

Network Settings

 panel 

 

ETH Port Status 

 
The status of the ethernet link is shown by the 
icons: 

•

 

Link is down (red) 

•

 

Link is OK (green) 

 
NOTE: This is the equivalent to the green LED on 
the rear-panel ETH connector. 
 

ETH Port Direction 

 
Use the pulldown to select the Ethernet port 
functionality. Options are: 
 

•

 

OFF – not functional 

•

 

INPUT – accepts incoming transport stream 

•

 

OUTPUT – sends transport stream 

 
 
 
 
 
 
 
 

Figure 3.12 

 The Test panel 

Figure 3.18  

Network Settings panel 

Summary of Contents for DENSITE IRD-3802
















































Reviews:

No comments