GUIDE TO INSTALLATION AND OPERATION
20
| IRD-3802
CVBS tab
This tab contains controls to configure the analog
video output signal.
Blanking Mode
Use the pulldown to select whether the blanking on
the output signal will be narrow or wide
Luma Range
Use the pulldown to choose whether to restrict the
Luma signal range to normal limits, or to allow
super whites and blacks (i.e. a much expanded
range).
•
Normal
•
Allow Super Whites and Blacks
NTSC Setup
Use the pulldown to select whether setup will be
added to the composite video output.
•
OFF
•
ON
3.4.5 The
Audio Processing
panel
This panel provides controls for selecting the audio
downmix mode of this IRD-3802, and for monitoring
some audio parameters
Config tab
Analog Audio Output
(Note: the Analog Output option must be activated
in order to use these controls)
Synchronization
Use the pulldown to select whether the analog
audio output will be synchronized with CBVS (which
is not frame synced) or SDI
Left Source, Right Source
Use the pulldowns to select the source of audio for
the two output channels. The available choices are
the same for both:
•
Left
•
Right
•
Center
•
LFE
•
Left
Surround
•
Right
Surround
•
Auxiliary Audio Left
•
Auxiliary Audio Right
Figure 3.8
Video Output panel – CVBS tab
Figure 3.9
Audio Processing panel – Config tab