manualshive.com logo in svg

Miranda DENSITE IRD-3802, Manual To Installation And Operation, Page: 30 / 47

Share
Download
Miranda DENSITE IRD-3802 Manual To Installation And Operation Download Page 30

GUIDE TO INSTALLATION AND OPERATION 
 

30

  |  IRD-3802 

Up/Down/Cross option 

 
This option enables up-conversion (SD-to-HD), 
down-conversion (HD-to-SD) and cross-conversion 
(HD-to-HD) functionality on the IRD-3802. 
 
To activate this option, you must: 

•

  Obtain a licence key from Miranda 

Technologies Inc. 

•

  Type the licence key in the box 

•

  Click on ENABLE OPTION to enable the 

option’s features. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Analog Output option 

 
This option activates the analog composite video 
and analog audio outputs of the IRD-3802. 
 
To activate this option, you must: 

•

  Obtain a licence key from Miranda 

Technologies Inc. 

•

  Type the licence key in the box 

•

  Click on ENABLE OPTION to enable the 

option’s features. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Figure 3.25

  Options panel – Up/Down/Cross

Figure 3.26 

 Options panel – Analog Output 

Summary of Contents for DENSITE IRD-3802
















































Reviews:

No comments