GUIDE TO INSTALLATION AND OPERATION
22
| IRD-3802
•
625 from URS (Universal Reference Signal) – selects the internal reference (625) from the backplane
•
Input – uses the currently-selected input signal.
The
Used Reference
box shows the reference currently in use, which is helpful in Auto mode
Vertical (lines)
With this adjustment, a value ranging from
0
to
+200
lines, compared to the reference or the processing
delay, may be set. This adjustment can be used in conjunction with the horizontal timing adjustment.
Horizontal (
μ
sec)
With this adjustment, a value ranging from zero to the equivalent of 1 horizontal line in the current operating
format (e.g. ranging from
0
to
63.46
µs for 525-line operation;
0
to
64.00
µs for 625-line operation; etc)
compared to the reference or the frame boundary, may be set.
Additional Frame Delay
Use the pulldown to select an extra frame delay to be added to the output.
Choices: 0, 1, 2 or 3 frames
NOTE: if the output format is interlaced, only 1 frame can be added. In progressive 720p, up to 3 frames are
allowed.
3.4.7 The
Probing
panel
Structure tab
Shows the structure of the transport stream
Figure 3.13
Probing panel – Structure tab