Insert
Sound
Diskette
Hold the diskette with the slotted shutter on
top, facing forward, and insert it gently into
the drive slot until it seats fully in and down.
Wait
about
12 seconds
The operating system and sound information
is now being transferred from the diske
the hardware memory. Slight mechanical
sounds will be heard coming from the drive.
CHANGING SOUNDS
Once the Mirage is up and running, there is a slightly different procedure to change sounds,
either loaded from the same diskette or from a different diskette.
Do this...
Here's what's happening...
Press LOAD
button(s) either
UPPER,
LOWER or both
Before loading the actual sound
information, you must s
the sound wi11 be available on the
upper half of the keyboard, the lower
half, or the entire keyboard.
Press 1, 2, or 3
on the SELECT
Keypad
Each diskette has three sounds, Upper
and Lower. Refer to the
for a description of each.
CANCEL
If you change your mind about which
sound you wish to load, press
CANCEL and begin again.
- OR -
ENTER
This will initiate the transfer of
information from the diskette to the
Mirage memory
Wait a maximum
of 8 seconds
Loading a sound into the memory of
both halves of the keyboard will take
about 8 seconds.
Hold the diskette with the slotted shutter on
top, facing forward, and insert it gently into
the drive slot until it seats fully in and down.
Display blank,
Drive light on
The operating system and sound information
is now being transferred from the diskette to
the hardware memory. Slight mechanical
sounds will be heard coming from the drive.
.21
(Master Tune)
This parameter will
always show after
the first sound is
loaded.
CHANGING SOUNDS
Once the Mirage is up and running, there is a slightly different procedure to change sounds,
either loaded from the same diskette or from a different diskette.
at's happening...
Display will show...
Before loading the actual sound
information, you must select whether
the sound wi11 be available on the
upper half of the keyboard, the lower
half, or the entire keyboard.
LU (load upper) or LL
(load lower) or LA
(load all). Flashing
Each diskette has three sounds, Upper
and Lower. Refer to the diskette label
for a description of each.
L1 (Load l) or L2
(Load 2) or L3 (Load
3). Flashing
If you change your mind about which
sound you wish to load, press
CANCEL and begin again.
Previous parameter
before pressing Load
button
This will initiate the transfer of
information from the diskette to the
Mirage memory
Display blank
Drive light on
Loading a sound into the memory of
both halves of the keyboard will take
about 8 seconds.
When the Load is
completed, the number
of the last used
Once the Mirage is up and running, there is a slightly different procedure to change sounds,
LU (load upper) or LL
completed, the number
