Load Lower Sound 3 19 22 25 28
Load Lower Sound 3 18 21 24 27
Change Lower Prog. No. 29 30 31 32
Change Lower Prog. No. 28 29 30 31
Load Upper Sound 1 33 36 39 42
Load Upper Sound 1 32 35 38 41
Load Upper Sound 2 34 37 40 43
Load Upper Sound 2 33 36 39 42
Load Upper Sound 3 35 38 41 44
Load Upper Sound 3 34 37 40 43
Change Upper Prog. No. 45 46 47 48
Change Upper Prog. No. 44 45 46 47
Note: Changing Programs remotely from a MIDI controller will cause the Mirage to display only
the value of the program (1, 2, 3, or 4). The first digit of the display will be blank.
Example:
1.
Set Parameter 84 on the Mirage to 2. This will allow key, controller, and program
change information to be transmitted and received.
2.
If you select Program 3 on the ESQ-1, it will cause the Mirage to load sound 3 and
select program number 1.
3.
Selecting Prog. 16 on the ESQ-1 changes the upper and lower programs of the Mirage
to #4.
4.
If you set Parameter 84 on the Mirage to 3, you must press the Up Arrow button on the
ESQ-1 following the program selection before the Mirage will respond.
Loading Sounds and Transmitting MIDI Program Changes
You can load a sound from the front panel of the Mirage and select a program number at the
same time. When you do so the Mirage will send a program change over MIDI.
When loading a Lower, Upper, or Both sounds from disk, you can select program 1, 2, 3 or 4
before hitting the ENTER button. When the sound finishes loading, the program you specified
will be selected.
If parameter 84 is set to a value of 2 or 3, then loading a sound from the Mirage front pane1 will
transmit MIDI program change information as outlined in the tables on the previous page. If you
change programs with the upper/lower program link switch (parameter 25) set ON, then program
changes 13 through 16 will be transmitted. If you change a lower program with the link switch
set OFF, then program changes 29-32 will be transmitted. If you change an upper program with
the link switch set OFF, then program changes 45-48 will be transmitted.
