Press REC button
(2nd time)
You're now telling the
sequencer that this is a
new sequence. Any
sequence in the Mirage
memory will be erased
as the new sequence is
entered.
rS
Not flashing
Play any key, Press
ENTER button, or
Press the Foot- switch
(param 89 "on")
Any of these "events"
will start the recording
process. All notes, key
velocity and PITCH and
MOD WHEEL changes
will be recorded. Any
delay between the
first "event" and the
first key played will
also be recorded.
Sr
(sequence recording)
Press STOP
Sequencer will stop
recording and end the
sequence at this point.
(last parameter
number used)
- OR -
Press PLAY
The sequencer will
stop recording and
immediately begin to
play the sequence
from the beginning.
-The initial value of
param. 87
INTERNAL
CLOCK RATE
- OR -
Hit the Footswitch
(with Parameter 89
on)
You may now accompany the playback without recording further.
Changing the Playback Speed
You can speed up or slow down the playback of the sequence by changing the value of
parameter 87 (see Selecting and Changing a Parameter). Increasing the number will increase the
tempo, decreasing the number will slow down the tempo. The Display shows the new value of
the internal clock rate.
