27
No water and motor
tone increases.
Cistern has run out of
water.
Turn off the Elite 2
immediately and resolve
cistern storage difficulty.
Internal pump unit faulty
or thermal trip has
operated.
Wait for internal pump/shower
to cool down. If still faulty
contact your installer.
Malfunction
Cause
Remedy
Handset sprayplate
blocked.
Remove and clean (Refer to
Maintenance
in the I, O & M
guide for the fitings).
Unable to select a
cool enough shower
during summer
months.
Due to the rise in water
mains supply temperature,
the power rating may be
too high.
Turn the TOP knob to
MEDIUM setting and
re-adjust temperature knob
until suitable temperature is
achieved.
Operation of
temperature knob has
little or no effect on
water temperature.
Remove Handset and clean
(Refer to
Maintenance
in the
I, O & M guide for the fitings).
If fault still persists contact
your installer.
Handset sprayplate
blocked.
Shower cycles from
hot to cold.
The temperature knob is
positioned at an unsafe
level causing the Elite 2
thermal trip to operate
and cut the power to the
heater tank.
Turn the temperature knob
sufficiently anti clock-wise to
increase water flow and
reduce temperature.
