Mira Advance ATL, Installation & User Manual

Page: 5 / 56

5
1.9. If any of the following conditions occur, isolate the electricity and water
supplies and refer to "To contact us", on the back page of this guide.
1.10. Isolate the electrical and water supply before removing the cover.
1.11. Mains connections are exposed when the cover is removed.
1.12. Refer to the wiring diagram before making any electrical connections.
1.13. Ensure all electrical connections are tight, to prevent overheating.
2. Caution!
2.1. Read all of these instructions and retain this guide for later use.
2.2. Pass on this guide in the event of change of ownership of the installation
site.
2.3. Follow all warnings, cautions and instructions contained in this guide, and
on or inside the appliance.
2.4. The electrical installation must comply with the "Requirements for
Electrical Installations" commonly referred to as the IEE Wiring
Regulations, or any particular regulations and practices, specified by the
local electricity supply company in force at the time of installation. The
installation should be carried out by an electrician or contractor who is
registered, or is a member of, an association such as:
2.4.1. National Inspection Council for Electrical Installation and Contracting
(NICEIC), throughout the UK.
2.4.2. The Electrical Contractors Association (ECA), England and Wales.
2.4.3. The Electrical Contractors Association of Scotland (ECAS).
1.9.1. If the cover is not correctly fitted and water has entered the appliance
case.
1.9.2. If the case is damaged.
1.9.3. If the appliance begins to make an odd noise, smell or smoke.
1.9.4. If the appliance shows signs of a distinct change in performance,
indicating a need for maintenance.
1.9.5. If the appliance is frozen.