Mira Advance ATL, Installation & User Manual

Page: 12 / 56

12
Section
6
Specifications
1. Plumbing
1.1. The inlet connector assembly incorporates an inlet filter, which swivels to allow
these entry positions, top, top back, bottom and bottom back inlet.
1.2. The outlet terminates with a 1/2" BSP male thread for connection to a Mira
flexible shower hose.
1.3. A maintained pressure of at least 1 bar is recommended for the product up to
a maximum static pressure of 10 bar.
Thermostatic performance will be maintained down to 0.5 bar maintained
pressure. However, this will result in reduced power and therefore reduced flow.
1.4. Minimum static pressure 0.2 bar to keep the flow valve closed.
1.5. The Mira Advance ATL will provide satisfactory performance with incoming
water supply temperatures between 2 - 28 0 C.
1.6. Maximum ambient temperature for the Mira Advance ATL whilst in use is 30 0 C.
2. Electrical
2.1. Mira Advance ATL supply fuse - 8.7 kW 40 Amp
9.8 kW 45 Amp
2.2. The terminal block will not accept cable larger than 16mm 2 .
2.3. The Mira Advance ATL will provide satisfactory performance with an incoming
electricity supply voltage of 230 V +/-10%.
3. Standards and Approvals
3.1. This Mira Advance ATL complies with all relevant directives for CE marking.