27
FauLT DIaGnosIs
1. user Troubleshooting Guide
The Mira advance aTL electric shower is fully performance tested after assembly. In
the unlikely event that you experience problems with the appliance, then the following
procedures will enable basic troubleshooting before contacting the competent
tradesperson responsible for installing the shower.
Warning!
There are no user serviceable components beneath the cover of the
appliance.
only a competent tradesperson should remove the cover whilst observing the
warnings given in section:
'2. Installer Troubleshooting Guide'
, prior to performing
any maintenance.
Reset the shower
This is the first solution to the appliance not operating (i.e. the reset light is
illuminated).
Do noT
switch on the appliance if there is a possibility that the water in the shower
is frozen!
1.
Isolate electrical supply.
15 secs
2.
restore power to the appliance. The
appliance may "beep" and the
start/
stop
button pulse for 15 seconds.
3.
Wait for the
start/stop
button to stop
pulsing, then operate the appliance,
refer to section:
'operation, using
the shower'
.
4.
If the failure continues after resetting,
there are a few basic supply checks
that can be performed.
continued.....
