Spirodoc
cod. 980156
Rev 1.3
EN 38/67
E
N
GLI
S
H
Connected to a portable PC the
Spirodoc
can be used for epidemiological studies
conducted in occupational environment, schools, etc etc..
Other than the usual spirometric parameters and the F/V in real-time the Spirodoc also
plots the most refined indices such as the ventilatory profile and the extrapolated
volume (Vext).
The PC software incorporates the most up to date bronchial provocation protocols
displaying the dose-response and time-response of the FEV1
WARNING
When the device is connected to the PC it cannot be remotely controlled from the
device itself. The default settings of the PC software will be transferred to the device
and will remain in the device even when used in stand-alone mode; for example when
the Spirodoc is connected to the PC and the user selects the type of turbine
(disposable or reusable) the selection will be saved in the device and remain effective
even when the Spirodoc is used in stand-alone mode. So pay attention to the type of
turbine setting.
3.11
Spirometry testing
In order to perform proper spirometry testing the following instructions are to be
followed carefully.
Insert the turbine in the appropriate housing until it reaches the mechanic stop and
successively rotate the turbine clockwise until it stops. Insert the mouthpiece at least
0.5 cm inside the groove of the turbine.
Place the noseclips on the nose so as not to let any air out of the patient‟s nostrils.
Hold the Spirodoc from both ends with both hands or grasp it like a mobile phone.
The touchscreen must always face the patient taking the test.
Place the upper part of the mouthpiece in the mouth making sure that no air leaks
from the sides of the mouth.
If possible it is recommended to stand up while performing the test. During expiration
it is recommended to bend forward the upper part of the body so as to release all
the air out with the aid of the abdominal muscles.
WARNING
While performing a test make sure not to interrupt the test prematurely or turn off the
device by accidentally touching the screen.
By touching the
icon the user may access the spirometry testing area from the
simplified menu mode. With the extended menu the main screen will display the
different types of spirometry tests as follows:
FVC spirometry testing
VC type spirometry test
