Spirodoc
cod. 980156
Rev 1.3
EN 37/67
E
N
GLI
S
H
Once a testing session has been
selected the database screen will
show the adjacent image. By
scrolling the screen as in paragraph
3.1 the user may select the desired
test of a session.
The three icons on the lower part of
the screen allow access to the
following functions:
To perform a new testing session with the selected patient.
To send via Bluetooth to a printer the parameters of a selected test.
To view the parameters of a selected test.
The user may return to the previous screen by using the
icon.
WARNING
Printing via Bluetooth is possible only after setting at least one printer from the
Bluetooth printer list. Refer to paragraph 3.6 for proper setup of this function. If no
printer has been selected the device will show the following message:
EMPTY LIST
Device search
Touch OK to confirm
By touching the OK icon the device will search for any nearby devices; if any devices
are found these can be memorized in the specific Bluetooth list.
3.9
Display of last session from current patient.
Case I
o
: simplified menu
To view the last spirometry tests performed by the current patient touch the
icon.
In the spirometry menu the icon
allows to access the most recently perfomed
tests
To display the most recent oximetry tests performed by the current patient touch the
icon.
Inside the oximetry menu the
icon allows to access all data from the most recent
tests.
3.10
PC On line mode (connected to a PC)
In the PC on-line mode the spirometer becomes a fully functional laboratory spirometer
which works in real-time connected to a PC.
PC interface is via USB cable or Bluetooth connection.
The Spirodoc
becomes an intelligent transducer for the measurement of volume and
flow while the PC controls the device including the on and off function.
