41
Content Subject to Change •
988767UM REV A
EMERGENCY STOP
The RoboScrub 20 is equipped with two Emergency Stop (aka E-Stop) buttons, one to the right of the steering wheel and
one on the rear of the machine. If there is an emergency and the RoboScrub 20 must be immediately stopped, press one
of these red Emergency Stop buttons.
NOTE:
THE ROBOSCRUB 20 MAY RELEASE ANY FLUIDS THAT HAVE NOT YET REACHED THE
RECOVERY TANK. MAKE SURE TO MOP UP ANY STANDING FLUIDS TO AVOID A SLIPPING OR
FALLING HAZARD.
If the Emergency Stop button was pressed in error or the emergency has been resolved, perform the following steps to
resume the robotic route:
1. Per UI touchscreen instructions, inspect the
environment and the machine, and clean up any
standing
fl
uids.
2. Release the engaged Emergency Stop button by
twisting it to the right (clockwise).
3. Select
CONFIRM
to con
fi
rm that any environmental
or machine issues have been resolved.
4. Press the Start/Pause button on the rear of the
machine to resume the robotic route.
