27
Content Subject to Change •
988767UM REV A
MANUAL OPERATION
Before turning on the RoboScrub 20, make sure it is fully charged and free of damage. Perform the following steps to use
the Minuteman® RoboScrub 20 manually:
1. Fill the solution tank via the solution
fi
ll port located on the top left corner of the back of the
RoboScrub 20.
2. Ensure the operator seat is securely lowered with the two contact switches connected.
3. Sit on the operator seat, insert the ignition key and turn to the right (clockwise) to start the
RoboScrub 20. Wait for the User Interface (UI) Touch Screen to display options to Run Route,
Teach Route, and Settings.
4. Press the up or down direction button to determine whether you will be driving forward or backward.
5. Select the desired solution
fl
ow control setting.
6. Press the one-touch button to engage the cleaning components (scrub brush and squeegee are lowered,
and vacuum turns on). When cleaning is complete, press the one-touch button again to disengage the
cleaning
components.
7. Press the accelerator pedal to drive the RoboScrub 20 along the desired cleaning route.
You can adjust your speed via the force applied to the pedal — light is slow, heavy is fast.
Remove pressure completely from the accelerator pedal to stop.
