Minuteman M220021H13 Operation & Service Manual Download Page 22

19

WARRANTY INFORMATION

CARB SMALL ENGINE CERTIFICATION
MANUFACTURER: HONDA

INTERNATIONAL INC

ENGINE FAMILY:
WMNTS.4372K1

XMTRS.2492K3

XMTRS.4942K2

CALIFORNIA EMISSION CONTROL

SYSTEM WARRANTY STATEMENT

The California Air Resources Board and

Minuteman International, Inc. are pleased
to explain the emission control system

warranty on your 1998 and later utility

engine. In California, new utility and lawn
and garden equipment engines must be

designed, built and equipped to meet the

State’s stringent anti-smog standards.
Minuteman International, Inc. must

warrant the emission control system  the

your utility equipment engine for the
periods of time listed below provided

there has been no abuse, neglect or

improper maintenance for your utility
equipment engine.

Your emission control system may
include parts such as the carburetor or

fuel injection system, the ignition system

and catalytic converter. Also included may
be hoses, belts, connectors and other

mission-related assemblies.

Where a warrantable condition exists,

Minuteman International, Inc. will repair

your utility equipment engine at no cost
to you including diagnosis, parts and

labor.

MANUFACTURER’S WARRANTY

COVERAGE

The 1998 and later utility and lawn and
garden equipment engines are

warranted for two years. If any emission-

related part on your engine is defective,
the part will be repaired or replaced by

Minuteman International, Inc.

OWNER’S WARRANTY

RESPONSIBILITIES

As the utility and lawn and garden
equipment, you are responsible

for the performance the required

maintenance listed in your owner’s
manual. Minuteman International, Inc.

recommends that you retain all receipts

covering maintenance on your utility
equipment, but Minuteman International,

Inc. cannot deny warranty solely for

the lack of receipts or for your failure
to ensure the performance of all

scheduled maintenance. As the utility

equipment engine owner you should,
however, be aware that Minuteman

International, Inc. may deny you warranty

coverage if you utility equipment engine
or a part has failed due to abuse,

neglect, improper maintenance or
unapproved modifications.

You are responsible for presenting your
utility equipment to a Minuteman

International, Inc. distribution center as

soon as the problem  exists. The  warranty
repairs should be completed in a

reasonable amount of time, not to exceed

30 days.

If you have any questions regarding your

warranty rights and responsibilities, you
should contact Minuteman International,

Inc. at 1-800-323-9420. Minuteman

International, Inc. 111 South Rohlwing
Road, Addison, IL 60101.

MANUFACTURER’S EXPLANATION OF
WARRANTY COVERAGE

The engine manufacturer warrants to the
original owner and each subsequent

purchaser that each subsequent

purchaser that each new engine will be
free from manufacturing defects in

materials or  workmanship under normal

use during a period of two (2) years from
the date of  delivery, provided it is operated

and maintained in accordance with

engine owner manual operating
instructions.

Repair or replacement of any warranted
part will be performed at no cost to the

owner at a warranty station. For the

Minuteman International, Inc. repair
station nearest  you call 1-800-323-9420.

CARB SMALL ENGINE CERTIFICATION
MANUFACTURER: HONDA

INTERNATIONAL, INC.

ENGINE FAMILY:
WMNTS.4372K1

XMTRS.2492K3

XMTRS.4942K2

Any warranted part which is not

scheduled for replacement as required
maintenance, or which is scheduled only

for regular inspection to the effect of

“repair or replace as necessary” is
warranted for the warranty period. Any

warranted part which is scheduled for

replacement as required maintenance is
warranted for the period of time up to

the first scheduled replacement point for

that part.

The owner will not be charged for

diagnostic labor which leads to the
determination that a warranted part is

defective; if the diagnostic service is

performed at a warranty station.
Minuteman International, Inc. is liable for

damages to other engine components

caused by failure of a warranted part still
under warranty. Minuteman International,

Inc. is not liable for failure of warranted
parts caused by the use of add-on

modified parts.

Warranty service or repairs are available

at all Minuteman International, Inc service

centers that are franchised to service this
engine.

Any Minuteman International, Inc.
approved replacement part may be

used in the performance of warranty

maintenance or repairs on emission-
related parts and will be provided to the

owner without charge if the part is still

under warranty.

The owner is responsible for the

performance of the required
maintenance, as defined in the

Minuteman International, Inc. owner’s

manual for this engine.

SPECIFIC EMISSION-RELATED

WARRANTED PARTS

Fuel Metering System

Carburetor and internal parts
LPG Regulator

Air Induction System

Air intake manifold
Air filter element

Air filter element-prefilter

Ignition System

Spark plug

Magneto

Catalyst or Thermal Reactor System

Exhaust manifold

Muffler

Miscellaneous items used in above
systems

Fuel line and vacuum hoses, wire

harness, connectors & assemblies

To obtain warranty service, you must take

your equipment together with proof of
original retail purchase date, at your

expense to an authorized engine dealer

If upon a warranty inspection, a defect is
identified, such warranty repairs or

replacement will be made without charge

for parts or  labor.  All parts replaced under
warranty will be considered as part of the

original product and any warranty on

those parts will expire coincident with the
original product warranty.

Issue Date: 11/11/97

IHNXS.3892U meets US EPA SNRE P#2
2005 and CARB Tier II 2002 SORE
Regulations.

Summary of Contents for M220021H13
























Reviews: