Minuit Une IVL PHOTON, Service Manual

Page: 46 / 63

IVL™ Photon Service Manual AA 46
TESTING
TES1:
TILT TESTING
Tools needed:
TrueCon1 cable
Instructions Diagram
1.1
The purpose of this testing is to test the TILT
function.
Make sure that the Globe acrylic shape ( MT1-
001714- GLOBE-ASSEMBLY ) is in place.
Turn On the product, go to Maintenance
→
Autorun
→
TEST TILT.
Select ALL or the number of the TILT( MT1-
000935- LATERAL-BELT-ACTUATOR-ASSEMBLY) you
want to test.
1.2
Observe the sequence that should look like this:
1. Reset of the tilt and positioning in A.
2. Slow movement until B position (90°).
3. Two slow full turn.
4. Two fast full turn.
=> Stop in
A position.
During all this procedure, they should be no blocking
and no particular noise or weird movement.
Position
A at the beginning and at the end of the
procedure must be the same.
1
2
3+4
A POSITION
B POSITION
A POSITION